Fireplace installation in Jupiter FL - a gas fireplace vented the right way
Have an unused firebox or a bare wall? We help you pick the vent, set the gas fireplace and build the masonry around it.
- Fully licensed and insured.
- Free quotes on site.
- Expect a reply within 1 business day.
What goes into installing a gas fireplace, its vent and the masonry around it?
Fireplace installation in Jupiter means setting a gas fireplace in your home, running the vent that carries its exhaust gases outside when the unit uses one, and building the hearth and surround around it, often with a stone face or a block chase. Most of the planning comes down to the venting type, so that's what we settle first.
Most folks who call about this have an old wood firebox they've stopped lighting, or a family room wall that feels like it's missing something. The price mostly turns on the venting type, how far the vent has to run to get outside and how much masonry goes around the unit, from a simple hearth to a full stone veneer face. The schedule turns on getting the unit in hand, the permit review and inspections, and how much block or stone work there is. When the job needs a permit, we file it with the Town of Jupiter's Building Department, which takes applications online, and we handle the paperwork for you. You'll get your own figure in a written estimate that spells out what's included.
How do you know it's time for a new fireplace?
A firebox you never light
You've got a wood fireplace that sits cold because hauling wood and sweeping ash isn't worth the trouble. That usually makes it a good spot for a gas unit, and leaving it alone just keeps a drafty, sooty opening in your wall.
Cracks around the opening
You see hairline cracks, loose stones or dark streaks on the surround of an existing fireplace. That's usually heat, settling or something behind the face, and the longer it goes, the more of the surround has to come off when we fix it.
A blank wall in your plans
You're remodeling a room or adding on, and you keep picturing a fireplace on one wall. Deciding now costs less because the vent route and any block chase go in before the finishes, not after.
Often paired with a new fireplace
Stone veneer installation
Stone veneer gives a new fireplace a natural stone face and hearth without the weight of full stone, so it looks built into the room.
Concrete block walls
When the vent needs a chase or the unit sits on an outside wall, a block wall gives the fireplace a solid masonry frame to live in.
How we handle your fireplace installation
I start by sitting down with you about the venting type, because that choice decides where the vent runs, what the wall has to hold and a good part of the cost. Once you've picked a unit, we lay out the opening and hearth, the unit goes in to the maker's instructions with its own vent, and then our crew builds the masonry around it and cleans up before we leave. Here in Florida, a listed direct-vent unit has to be installed the way its maker says, so I read those instructions before we set the first block, and we build to them.
Most fireplaces need a little more than the box itself. If you want a stone face, we handle the stone veneer installation on the surround and hearth, and if the vent needs a chase or the unit sits on an exterior wall, we frame it with concrete block walls so everything has a solid home.
Direct-vent unit
It's a sealed box that pulls its air from outside and sends its gases back out through a two-pipe vent. It suits most homes, and it's where I start most conversations.
B-vent unit
This one draws its air from inside the house and vents up a chimney or a vertical pipe. It can suit a house where a straight run up through the roof is easy to build.
Vent-free unit
It has no outside vent, so what the flame gives off stays in the room. It saves the vent work, and I'll talk you through the moisture trade-off before you settle on it.
Get a written estimate for your gas fireplace and surround
Send the form and we'll reply within one business day to set a free on-site visit, with no pressure to book. Calling (561) 532-0289 works just as well.
Call (561) 532-0289Why Jupiter homeowners call Excel Jupiter Concrete and Masonry for fireplaces
The owner walks your room
I come out myself to look at the room and ask how you'll use the fireplace. I'm on the job with our own crew too, so the person who planned it is there when it gets built.
Trained where inspectors check everything
I learned masonry on a municipal crew, where a wall had to pass an inspector before anyone signed off. We've been in business since 2021, and I still build a hearth like someone's going to check it.
Fully licensed and insured, start to finish
We're fully licensed and insured. You shouldn't have to wonder who's covered while a crew is working in your living room.
Based in Jupiter, working county-wide
We're based in Jupiter and work across Palm Beach County and the cities around it, up into Martin and St. Lucie counties. We see a lot of block homes out here, so building a fireplace into a block exterior wall is familiar ground.
The vent is the part you won't see, and it's the part we get right first. Tell us about your room and I'll come take a look.
What happens when you call us about a fireplace in Jupiter?
Call or send the form
Call (561) 532-0289 or send the form, and tell us a little about the room. We'll set a time for me to come out and see it.
Walk the room together
I walk it with you, ask a lot of questions about the wall, any chimney and how you'll use the fireplace, then put together a written estimate. It spells out the venting, the masonry and exactly what's included, so you know what you're paying for.
Permit, build and inspections
Once you say go, we handle the permit paperwork when the job needs it, and our crew does the work with me on site. The city books inspections through its online permitting portal, with phone help at 561-741-2286 if you need it.
Final walk-through with you
Before we pack up, I walk the finished fireplace with you and show you what we built and where the vent runs. The work is backed by our satisfaction guarantee.
Common questions
What is the best way to vent a gas fireplace?
For most homes, it's direct-vent. The national code guide I work from calls it the most common and safest modern option, so it's the one to weigh the others against. We'll go over B-vent and vent-free at the estimate if you're curious about them.
Can a new gas fireplace use my old chimney in Jupiter?
Usually not for a direct-vent unit. One maker's instructions say each direct-vent unit gets its own vent straight to the outside, separate from any chimney serving another gas or wood-burning appliance, and as I mentioned above, Florida holds the install to the maker's instructions. If your chimney still serves something else, plan on a dedicated vent.
What causes humidity problems with a vent-free gas fireplace?
The flame's exhaust stays in the room, and it's mostly water vapor and carbon dioxide. That vapor can raise your indoor humidity and help mold grow, so choosing vent-free means accepting extra moisture in the house.
How much does fireplace installation cost near Jupiter, FL?
Fireplace and chimney installation in the West Palm Beach area usually costs about $2,300 to $13,700 per project. That's a modeled range for the area, not our price, and where you land mostly depends on the venting type, the length of the vent run and how much masonry goes around the unit. Your written estimate gives you your own figure.
How do I check a gas fireplace installer's license in Florida?
The Florida Department of Agriculture and Consumer Services licenses the businesses and people who install, service or repair LP gas systems and appliances. Its Category V LP Gas Installer license covers gas piping and appliances, and holders have to pass a state exam and show at least $1 million in liability insurance. For a contractor's license, ask whether it's certified, which covers all of Florida, or registered, which covers only the cities or counties where they hold a certificate of competency.
Should I put a carbon monoxide alarm near a gas fireplace?
Yes, it's a smart addition. One maker strongly recommends a carbon monoxide detector or alarm wherever gas appliances are in use, so add one to the plan when the fireplace goes in.
Start planning your gas fireplace today
Call (561) 532-0289 or send the form, and if you can, tell us whether your house has a chimney and which venting type you're leaning toward, so I come out with the right questions.